First off, you should be powering this charger with some real juice. At first, I was simply plugging the USB cable into one of the available USB ports in my Chevy, wrong! I soon learned that these factory ports are much too wimpy to power this charger, I would keep getting intermittent charging, on and off. At least this is my experience. I learned that I need to use an accessory port using a high power adapter like this beautiful one:
https://www.amazon.com/gp/product/B0BLYX8SHZ/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
All power problems solved! Also fyi you can also purchase this exact ESR charger with their own included charging adapter for about $10 more, as a kit.
My set up includes mounting the ESR charger to the ball end of a flexible metal gooseneck and it works great. I had to wrap a bit of electrical tape around the ball end to make my ESR charger fit tightly. This gooseneck has a big spring clamp at the end and can work great for any DIY install. I purchased it locally at a computer store but I believe this is the same one here on Amazon:
https://www.amazon.com/SLBSTORES%C2%AE-Gooseneck-Universal-Bracket-Flexible/dp/B01GNQD5J2
I would not recommend mounting this charger to a vent, especially because this magnet is super strong. I use an ESR MagSafe compatible case, see picture. It works and holds super strong on to the ESR charger, it is not going anywhere!
So everything has been working great except for one thing. If you're like me, you are constantly switching back and forth between Portrait and Landscape orientation. Every time I rotated it, the magnetic strength was so strong it would begin to rotate and unloosen the entire charger from the ball mount. Very frustrating. At first my solution was to stick on one of those charging metal rings on the back of my phone case, on top of the already existing ESR MagSafe ring built into the case. Because this provided a harder, smoother surface to rotate on as opposed to the soft plastic case material. This worked okay but the more I thought about it, I wondered why there was always so much friction when there shouldn't be any on the smooth glass surface of the charger. Upon further inspection, I figured out that the friction was being caused by this tiny black plastic lip that surrounds the outer edge of the entire glass surface of the charger. I am talking only about .5mm in height above the surface of the glass. You can feel it with your fingernail. This is what the case surface has actually been resting on, not the glass! Is this a defect? I don't know. But I have purchased two of these chargers and they both had this lip. Any ways, on to my modification....
I modified this ESR Charger by slicing off the excess lip surrounding the glass charging surface with a razor blade, see picture. Super easy. This allows for all surfaces to connect flat on to the charging surface. I held the razor blade at about a 45 degree angle all the way around. This eliminated the ridge that was causing the great amount of friction. If you always keep your phone in one orientation then this modification is not necessary. But for those that constantly rotate it, this makes a world of difference in smoothness! I removed the stick on metal ring on my case, don't need it anymore. The magnetic hold is super strong and I can smoothly and easily rotate between Portrait & Landscape, it works amazing! Now it is perfect, yes!
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Sustainability features
This product has sustainability features recognized by trusted certifications.
Carbon impact
Carbon emissions from the lifecycle of this product were measured, reduced and offset.
As certified by
Climate neutral by ClimatePartner The Climate neutral label by ClimatePartner certifies that the carbon footprint of a product was calculated and all associated emissions were offset. Additionally, ClimatePartner encourages companies to set ambitious reduction targets and reduce their products' carbon footprints. The certificate number can be entered on ClimatePartner’s website for additional information such as the supported carbon offset project(s). ClimatePartner is improving lives by helping companies tackle climate change with practical solutions.
Certification Number
Z4NNK8 Part of
There is a newer model of this item:
Similar item to consider
Amazon's Choice
Make it a bundle
We found 2 bundles with this item:
ESR for MagSafe Car Mount Charger (HaloLock), 15W Magnetic Wireless Car Charger, Compatible with MagSafe Car Charger, Air Vent/Dashboard Phone Holder Mount for iPhone 15/14/13/12, Fast Charging, Black
Page 1 of 1Start overPage 1 of 1
Frequently bought together
$27.99
Get it as soon as Friday, May 17
In Stock
+
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may ship from close to you
Page 1 of 1 Start overPage 1 of 1
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Climate neutral by ClimatePartner certifies the carbon footprint of a product was calculated and all associated emissions were offset.
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Carbonfree Certified determine the carbon footprint of the product, and associated carbon emissions are offset with reduction projects.
![LISEN for 15W MagSafe Car Mount Charger [2024 Upgrade] iPhone Wireless Car Charger Magnetic Phone Holder Mount, Automobile Ca](https://images-na.ssl-images-amazon.com/images/I/71w17AXKsHL._AC_UL160_SR160,160_.jpg)
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Climate neutral by ClimatePartner certifies the carbon footprint of a product was calculated and all associated emissions were offset.
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Climate neutral by ClimatePartner certifies the carbon footprint of a product was calculated and all associated emissions were offset.
![LISEN for Magsafe Car Mount Charger [20 Strong Magnets], for Magsafe Car Charger, Hands Free 15W Wireless Car Charger for iPh](https://images-na.ssl-images-amazon.com/images/I/71uauydPAUL._AC_UL160_SR160,160_.jpg)
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Climate neutral by ClimatePartner certifies the carbon footprint of a product was calculated and all associated emissions were offset.
From the brand
Product Description
Accessories Designed for MagSafe
 Magnetic |  25W 3-in-1 |  Kickstand |  Geo |  360 |  Classic |  Classic | |
|
Customer Reviews
|
23,220
|
1,740
|
5,885
|
2,950
|
8,979
|
76,403
|
23,467
|
|
Price
| $27.99 | $109.99 | $33.98 | $33.99 | $15.99 | $18.99 | $24.99 |
|
Product Type
| Car Charger | Charger with MagSafe | Wireless Power Bank | Magnetic Wallet Stand | Universal Ring | Hybrid Case | Hybrid Case + Stash Stand |
|
Compatibility
| iPhone 15/14/13/12 Series | iPhone 15/14/13/12 Series | iPhone 15/14/13/12 Series | iPhone 15/14/13/12 Series | iPhone 15/14/13/12 Series | iPhone 15 series | iPhone 15 series |
|
Designed for MagSafe
| ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
|
Magnetic Strength
| 1,400 gf | 1,200 gf | 1,000 gf | 1,500 gf | Matches paired device | 1,500 gf | 1,500 gf |
|
Main Feature
| Power in a snap | 15W Charging with MagSafe | Power in a snap | Full Find My functionality | Upgrade to MagSafe | Strong magnetic lock | Strong magnetic lock |
|
Other Feature
| Strong magnetic lock | CryoBoost fast charging | On-demand kickstand | 3-card storage | Strong magnetic lock | Air Guard corners | Air Guard corners & lens stand |
|
Material
| PC, ABS, magnets | PC, ABS, aluminum alloy | Aluminum alloy, PC, ABS | Vegan leather, PC, ABS, steel | Ferromagnetic steel | Acrylic, PC, TPU | Acrylic, PC, TPU, zinc alloy |
Compare with similar items
This Item  ESR for MagSafe Car Mount Charger (HaloLock), 15W Magnetic Wireless Car Charger, Compatible with MagSafe Car Charger, Air Vent/Dashboard Phone Holder Mount for iPhone 15/14/13/12, Fast Charging, Black |  |  |  |  |  | |
| Price | -20% $27.99 List: $34.99 | $19.99 | $99.99 | $24.99 | -8% $36.99 List: $39.99 | -40% $29.99 List: $49.99 |
| Delivery | Get it as soon as Friday, May 17 | Get it as soon as Friday, May 17 | Get it as soon as Friday, May 17 | Get it as soon as Friday, May 17 | Get it as soon as Friday, May 17 | Get it as soon as Friday, May 17 |
| Customer Ratings | ||||||
| Suction power | ||||||
| Charging power | ||||||
| Durability | ||||||
| Easy to install | ||||||
| Quality of material | ||||||
| Sold By | Dexterifytech US Store | JoyGeek direct | Dexterifytech US Store | Aporia International | Dexterifytech US Store | RCDDZSM |
| connector type | USB-A to USB-C | USB-A to USB-C | USB Type C | MagSafe, Wireless | USB-A to USB-C | USB Type C |
| number of usb ports | 1 | 1 | 1 | 1 | 2 | 1 |
| compatible devices | Smartwatches | Apple iPhone 14/14 Pro/14 Plus/14 Pro Max/13/ 13 Pro/ 13 Pro Max/ 13 Mini/ iPhone 12/ 12 Pro/ 12 Pro Max/ 12 Mini | Cellular Phones | Smartwatches | Smartphones | iPhone 15/15 Plus/15 Pro/15 Pro Max/iPhone 14/14 Plus/14 Pro/14 Pro Max/iPhone 13/13 Pro/13 Pro Max/13 mini/iPhone 12 Pro Max / 12 Pro/ 12/ SE/ 11 Pro Max/ 11 Pro/ 11/ Xs/ Xs Max/ Xs/ XR/ X/ 8/ 8 Plus/ 7/ 7 Plus/ 6/ 6s, Samsung Galaxy Note 20/ S21/ S21+/ S21 Ultra 5G/ S20/ S20+/ Note10/ Note10+/ S10/ S10+/ S10e/ S9/ S8, LG Google OnePlus and all smartphones even with thick case |
| input voltage | 120 volts | 12 volts | 9 volts | — | 12 volts | 9 volts |
| connector gender | Male-to-Male | Male-to-Male | Male-to-Male | — | Male-to-Male | — |
| power source | Corded Electric | Corded Electric | Corded Electric | Battery Powered | Corded Electric | Corded Electric |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
5:24
Click to play video
Unboxing and set up for MagSafe esr car charger
Phillip Langstaff
Videos for this product
2:15
Click to play video
Customer Review: Works best with MagSafe Case.
Dubble Kessler
Videos for this product
2:19
Click to play video
HaloLock Car Mount, Review and Demo, A Very Smart Design!
Seth Reviews
Sustainability features
This product has sustainability features recognized by trusted certifications.
Carbon impact
Carbon emissions from the lifecycle of this product were measured, reduced and offset.
As certified by
Climate neutral by ClimatePartner The Climate neutral label by ClimatePartner certifies that the carbon footprint of a product was calculated and all associated emissions were offset. Additionally, ClimatePartner encourages companies to set ambitious reduction targets and reduce their products' carbon footprints. The certificate number can be entered on ClimatePartner’s website for additional information such as the supported carbon offset project(s). ClimatePartner is improving lives by helping companies tackle climate change with practical solutions.
Certification Number
Z4NNK8 Part of
Reviews with images
Great mount for the 5th Generation 4Runner
It’s taken me a long time to find a MagSafe cellphone car mount that works well with my 5th generation 4Runner (2023) dash. It’s been difficult to find one that works let alone one has wireless charging! It works great with my iPhone 14 Pro Max with the Apple Silicon case.The adhesive mount option has a flexible base that conforms to the dash where I have it mounted. It works great and fits in the perfect location. Even if you didn’t want to use the wireless charging feature, it will work good for you if you have a 4Runner.Wireless charging works well and they do include a USB-A to USB-C cable.I will give an update on longevity or if anything changes but I think this is the one I have been looking for. If it fits your criteria pull the trigger!
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on September 26, 2023
https://www.amazon.com/gp/product/B0BLYX8SHZ/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
All power problems solved! Also fyi you can also purchase this exact ESR charger with their own included charging adapter for about $10 more, as a kit.
My set up includes mounting the ESR charger to the ball end of a flexible metal gooseneck and it works great. I had to wrap a bit of electrical tape around the ball end to make my ESR charger fit tightly. This gooseneck has a big spring clamp at the end and can work great for any DIY install. I purchased it locally at a computer store but I believe this is the same one here on Amazon:
https://www.amazon.com/SLBSTORES%C2%AE-Gooseneck-Universal-Bracket-Flexible/dp/B01GNQD5J2
I would not recommend mounting this charger to a vent, especially because this magnet is super strong. I use an ESR MagSafe compatible case, see picture. It works and holds super strong on to the ESR charger, it is not going anywhere!
So everything has been working great except for one thing. If you're like me, you are constantly switching back and forth between Portrait and Landscape orientation. Every time I rotated it, the magnetic strength was so strong it would begin to rotate and unloosen the entire charger from the ball mount. Very frustrating. At first my solution was to stick on one of those charging metal rings on the back of my phone case, on top of the already existing ESR MagSafe ring built into the case. Because this provided a harder, smoother surface to rotate on as opposed to the soft plastic case material. This worked okay but the more I thought about it, I wondered why there was always so much friction when there shouldn't be any on the smooth glass surface of the charger. Upon further inspection, I figured out that the friction was being caused by this tiny black plastic lip that surrounds the outer edge of the entire glass surface of the charger. I am talking only about .5mm in height above the surface of the glass. You can feel it with your fingernail. This is what the case surface has actually been resting on, not the glass! Is this a defect? I don't know. But I have purchased two of these chargers and they both had this lip. Any ways, on to my modification....
I modified this ESR Charger by slicing off the excess lip surrounding the glass charging surface with a razor blade, see picture. Super easy. This allows for all surfaces to connect flat on to the charging surface. I held the razor blade at about a 45 degree angle all the way around. This eliminated the ridge that was causing the great amount of friction. If you always keep your phone in one orientation then this modification is not necessary. But for those that constantly rotate it, this makes a world of difference in smoothness! I removed the stick on metal ring on my case, don't need it anymore. The magnetic hold is super strong and I can smoothly and easily rotate between Portrait & Landscape, it works amazing! Now it is perfect, yes!
Style: Standard Car Charger - BlackVerified Purchase
ESR MagSafe Charger, Love it!...and a modification that makes it even better...
Reviewed in the United States on September 26, 2023
First off, you should be powering this charger with some real juice. At first, I was simply plugging the USB cable into one of the available USB ports in my Chevy, wrong! I soon learned that these factory ports are much too wimpy to power this charger, I would keep getting intermittent charging, on and off. At least this is my experience. I learned that I need to use an accessory port using a high power adapter like this beautiful one:Reviewed in the United States on September 26, 2023
https://www.amazon.com/gp/product/B0BLYX8SHZ/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
All power problems solved! Also fyi you can also purchase this exact ESR charger with their own included charging adapter for about $10 more, as a kit.
My set up includes mounting the ESR charger to the ball end of a flexible metal gooseneck and it works great. I had to wrap a bit of electrical tape around the ball end to make my ESR charger fit tightly. This gooseneck has a big spring clamp at the end and can work great for any DIY install. I purchased it locally at a computer store but I believe this is the same one here on Amazon:
https://www.amazon.com/SLBSTORES%C2%AE-Gooseneck-Universal-Bracket-Flexible/dp/B01GNQD5J2
I would not recommend mounting this charger to a vent, especially because this magnet is super strong. I use an ESR MagSafe compatible case, see picture. It works and holds super strong on to the ESR charger, it is not going anywhere!
So everything has been working great except for one thing. If you're like me, you are constantly switching back and forth between Portrait and Landscape orientation. Every time I rotated it, the magnetic strength was so strong it would begin to rotate and unloosen the entire charger from the ball mount. Very frustrating. At first my solution was to stick on one of those charging metal rings on the back of my phone case, on top of the already existing ESR MagSafe ring built into the case. Because this provided a harder, smoother surface to rotate on as opposed to the soft plastic case material. This worked okay but the more I thought about it, I wondered why there was always so much friction when there shouldn't be any on the smooth glass surface of the charger. Upon further inspection, I figured out that the friction was being caused by this tiny black plastic lip that surrounds the outer edge of the entire glass surface of the charger. I am talking only about .5mm in height above the surface of the glass. You can feel it with your fingernail. This is what the case surface has actually been resting on, not the glass! Is this a defect? I don't know. But I have purchased two of these chargers and they both had this lip. Any ways, on to my modification....
I modified this ESR Charger by slicing off the excess lip surrounding the glass charging surface with a razor blade, see picture. Super easy. This allows for all surfaces to connect flat on to the charging surface. I held the razor blade at about a 45 degree angle all the way around. This eliminated the ridge that was causing the great amount of friction. If you always keep your phone in one orientation then this modification is not necessary. But for those that constantly rotate it, this makes a world of difference in smoothness! I removed the stick on metal ring on my case, don't need it anymore. The magnetic hold is super strong and I can smoothly and easily rotate between Portrait & Landscape, it works amazing! Now it is perfect, yes!
Images in this review
Reviewed in the United States on January 27, 2024
Style: Standard Car Charger - BlackVerified Purchase
Reviewed in the United States on February 7, 2023
Style: Standard Car Charger - BlackVerified Purchase
Top reviews from other countries
tim guimond
Works with proper case on phone
Reviewed in Canada on March 21, 2024Style: Standard Car Charger - BlackVerified Purchase
piervito di marzio
ottimo prodotto
Reviewed in Italy on April 23, 2024Style: Standard Car Charger - BlackVerified Purchase
Fat
Le mieux
Reviewed in France on March 9, 2024Style: Standard Car Charger - BlackVerified Purchase
Sangowan50
Une grande marque de qualité !
Reviewed in Belgium on January 11, 2024Style: Standard Car Charger - BlackVerified Purchase
Guille
Muy bueno
Reviewed in Spain on December 10, 2023Style: Standard Car Charger - BlackVerified Purchase
