• Innovative inflatable design-1 person can install in minutes
• A gazebo tent- including 2 zippered entrances & 4 breathable side panels
• Spacious indoor space- allow 10-12 people
• High-quality fabric - sun-proof, waterproof, flame-retardant
• Breathable mesh- prevent mosquitoes from entering
• Carry bag included-easier transportation & storage
• Imported

Directions

1.Open the SUMMUS carry bag and you can see the tent body.The first step is to unpack and flatten the tent.

2.Insert the 6 corners of the tent with 6 ground pegs at a 45° angle.It can insert the ground peg more firmly.

3.Find the inlet of the air column.Check the 2 other inlets and make sure they are both in closed state.Please attach the hose end with the white seal ring on it to the inlet valve at the angle shown in the picture. Then rotate to the right from CLOSED to OPEN .

4.Just start to inflate.It will be set up in a few minutes.

5.Please make sure the pressure is not over 7PSI when the inflation is completed.

6.Pull out the end of the hose directly and cover the valve cap after the inflation is completed.Then insert the ground peg to fix the windproof rope.You can install the gear loft if you need !

TIPS: 1.If you feel that the end of the pump hose is not firmly connected to the inflation valve:

-First make sure the white seal ring is still on the end of the pump hose. Then insert the end of the hose against the white valve and rotate to the right.

2.If you find the air is already hard to get into the tent, but it has not reached the recommended pressure:

-Make sure the pump is firmly connected to the inflation valve and there is no air leakage.

-Try to pull up and adjust the tent while inflating. Straighten the air column so that the air is not obstructed in the air column and is easier to enter.

-Make sure the other 2 inflation valves are closed and there is no air leakage.

3.If the inflation valve seems to be leaking when you inflate:

-It is recommended to unplug the end of the pump hose and reinsert.First make sure the white seal ring is still on the end of the hose. Then make sure that the connection between the pump and the white valve is firm and there is no air leakage.

-Make sure the other 2 inflation valves are closed and there is no air leakage.

Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item

Warranty: 90 Day Woot Limited Warranty